Featured

Crucial Tips to Memorize While Traveling with Your CPAP Machine

Perhaps you are new to CPAP machines or you simply haven’t been using it all the time but now you are planning to travel. What you should know? There are a lot of facts, tips and tricks you will need to memorize and all of them are explained below. Basically, you will need a portable CPAP machine, a CPAP Sanitizing Travel Bag and this list!

Carry CPAP machine with you while you are in a plane

The golden rule is that we all need sleep, regardless of where we are and what we are doing at that particular moment. This obviously means that we have to carry our CPAP machine with us at all times. Yes, they are allowed to carry and use in an airplane and you can place it in a bag right above your head. When you are in the need to use it, well use it. Now you can sleep with the same quality as in your bed at home while you are flying to your destination.

Carry a portable batterY

undefined

All CPAP machines do require power to work. Portable ones have their built-in or changeable battery included in the package. However, they are designed to provide a few hours of ‘’juice’’. To make sure your machine is always ready to assist you, carry portable battery. They are better than ever they are smaller and more powerful so you can have one that will charge the CPAP machine for hours. You can also use it to power the smartphone or a tablet, so you can get an idea.

Carry medical certificate with you

Some airliners or some travel mediums may require from you to justify the CPAP machine. As we have mentioned, they are allowed to use in airplanes and etc. but you may have to show the certificate from your doctor telling them that you are approved and you must use this type of treatment. Carry the certificate inside your wallet at all times.

Don’t forget an extension power cord

undefined

If you have travel the world you will know that 70% of the hotels power outlet is far away from your bed. You must place CPAP machine close to you, so you will either have to move the bed, which isn’t allowed or you will have to use a power extension cord. This is a simple thing we all need at some point and it is definitely something to consider. An extension power cord can be fit to your pocket and it will allow you to use the CPAP machine even when the power outlets is far away. If you have forgotten to carry yours, when you land, purchase a new one.

Adjust time zone on your CPAP machine

When you travel, you will eventually reach a different time zone, obviously. The goal here is to change and update the time and date on your CPAP machine. By doing this you will ensure that the machine shows actual data in the right moment and monitors the sleep accordingly. When you come back home, change the time and date to your time zone.

Carry CPAP sanitizer while traveling

This isn’t required if you are traveling somewhere for a few hours, but if your trip is longer than 12 hours, you will need a CPAP Sanitizing Travel Bag. It contains a CPAP machine cleaning device and it can be used to make sure the mask and tubing are 100% clean at all times. Many if not all of these gadgets are small and compact so they won’t occupy a lot of space in your travel bag.

Keep CPAP machine in a plastic, transparent bag

This tip is mandatory if your machine doesn’t come with a proper travel bag. Then you will have to place it and carry it inside a plastic bag. It should be transparent so airport authorities can see what’s inside and also to check it without having to open the bag. The reason is that if you carry a CPAP machine in your luggage, airport security personnel may place the machine into the ordinary tray for scanning purposes. These trays are filled with germs so you should avoid this as much as possible. In case the machine ends up in this tray, sanitize it before using it!

Clean the machine after you get home

After you voyage, you should clean the CPAP machine again and you should make sure there are no dirt, germs or anything on it. It is an obvious fact so you will probably memorize it instantly.

Don’t forget to carry an outlet adapter

If you are travelling outside your country, you will need an adapter to use with other power outlets. Ideally, you will get one that can be used with the US, EU, UK, and all the other power outlets. Keep in consideration that if you don’t have an adapter you are likely unable to use your CPAP machine. Once again we can see that this is a small addition to your luggage and it can fit any pocket inside the bag.

Use the apps to download the CPAP machine data from your travels

Here we have an interesting tip. It certainly isn’t the mandatory one but can be more than just helpful. New CPAP machines will keep track of your sleeping data. With a simple app, you can download that data and store it on your smartphone. You should do this in order to analyze the sleep data from your travels and compare it with your home. Now you can make adjustments if needed and you can make sure the overall result is as high as possible.

The final word

So, what we have learned today? We learned that you should carry CPAP machine alongside power outlet adapter, power extension cord, and a cleaning device. You are allowed to carry and use your machine literally anywhere in the world and you can make the overall process after and easier, with additional tips explained above.

PrimeClean CPAP Ozone Sanitizing Machine

Millions of people from all over the globe have been using CPAP machines to treat sleep apnea for years. It is simple, effective and one of the treatments that actually works without any side effects. But, most of you don’t know that if you use this treatment, you also need a CPAP Ozone Sanitizing Machine. The best example is PrimeClean and today we will discuss why it is important to use it on a regular basis.

Why Cleaning The CPAP Machine Is So Important?

The main reason why you need to make sure your CPAP machine is always clean and therefore safe to use is bacteria. There is a well-known study conducted by Harvard Medical School and several hospitals that found that there are over 2000 different bacteria on 48% of the tested CPAP masks only 48 hours after usage. 21% of additionally tested masks had between 100 and 500 colonies of bacteria as well. That’s why you need CPAP Ozone Sanitizing Machine!

In the same study, we were able to see that patients who used the same CPAP mask for 6-12 months without cleaning it properly ended up with CPAP equipment that cannot be disinfected. In other words, the bacteria are affecting the material itself now so not a single device can help you clean the equipment. That’s why it is highly recommended to clean the equipment on a daily basis and to replace it regularly.

As you were able to see, the main reason n why you need PrimeClean is to kill the bacteria that are located on the mask and the tube of the CPAP machine. These bacteria come in all sizes and can cause a variety of issues. The most common issue is pneumonia, something you definitely do not want to get during the COVID19 pandemic. There are many other issues as well, such as skin irritations, infections of airways and so much more.

Some masks can develop mold inside them. This also refers to the CPAP hoses. Mold can cause pneumonia, headaches, bronchitis and so much more. Look for common colds, sore throat, and irritations in your lungs as these are the most common symptoms.

Last but not least important issue is the odor that will become bad if there is plenty of bacteria inside the mask and the hose. This will make the treatment impossible or force you to stop using it completely. Both of these are serious problems that CPAP patients need to avoid as much as possible.

Conventional Cleaning Methods

You can clean CPAP hose and a mask using conventional methods. This means you will use wipes, warm water, and your time. The main problem here is the fact you are creating a moist environment that bacteria love. Also, this is an ineffective method due to the fact it cannot kill all the bacteria present. You will have to avoid hot water because it can damage CPAP components.

There is no need to add that you will have to disassemble your CPAP machine first, to soak the hose and a mask in warm water for 30 minutes and then clean it. Let it air dry. This method is recommended if you want to remove dirt or skin cells from the equipment. In the terms of bacteria, it is ineffective.

PrimeClean Is Here To Help You

PrimeClean is the best CPAP Ozone Sanitizing Machine at the moment and the one that will make CPAP machine cleaning much easier. It is an ozone cleaner, meaning it uses activated oxygen or ozone to kill bacteria. It can kill 99.9% of all bacteria on the hose and a mask of CPAP machine and it needs one hour to do that. It can kill the COVID19 virus as well, which is extremely important during the pandemic.

To use PrimeClean all you have to do is to disconnect the CPAP hose and a mask, place them in the bag and connect PrimeClean using a connection port. Turn on the device and wait for 30 minutes. Once done, wait additional 35 minutes so ozone can be converted back to oxygen, and you are done. It is recommended to clean or sanitize your CPAP equipment at least 4-5 times per day, although cleaning them every day is even better.

PrimeClean is small, compact and comes with a built-in battery. You will recharge the battery using a supplied cable and there is no maintenance present. On the other side, it is extremely efficient, as you were able to see easy to use and comes ideal if you want to use it while traveling across the globe.

Additional Perks Of PrimeClean

The main, additional perk is the fact you can use it for all types of CPAP masks and hoses. As a matter of fact, you can use it to clean almost anything that can fit the included bag. There are no complicated instructions, time-consuming details, or anything else. Connect it, let it do its job, and you are done.

We must add that there is no need to use any additional adapters, hardware, or anything similar. All you need is included in the box and ready to be used as soon as you get the package. PrimeClean is very affordable as well, so it will be a worthy investment.

Conclusion

Using PrimeClean CPAP Ozone Sanitizing Machine isn’t something you may consider. It is something you should use starting today and something that can make a massive difference in your treatment and help you when nothing else will. It is so important that every single CPAP patient should use it every single day.

How To Use PrimeClean CPAP Sterilization Machine

Did you know that cleaning your CPAP machine is mandatory? This is done to kill all the bacteria, germs, and other threats located inside. For that, you do need a CPAP Sterilization Machine. The most popular and the best option in 2020 is Prime Clean. Below we will explain how it works and why you should use it.

How to use PrimeClean?

Using PrimeClean is extremely simple. It is designed to be used by seniors and by all people, so there is no need to follow complicated steps, to adjust anything or similar. In fact, you only need to complete 3 simple steps.

Attack the CPAP hose to Prime Clean
Place the hose and the mask in a bag (included with PrimeClean)
Click ON button

As you can see, these are simple and obvious steps. Once activated, PrimeClean will start its process. You need 30 minutes to complete the process and once done, you can leave the CPAP components for 2 hours and use them after that.

PrimeClean is very quiet device. It has built-in battery that can last 10 years and needs 2 hours to recharge. There is no maintenance of any kind needed. It uses ozone or activated oxygen to clean CPAP equipment.

Ozone Cleaner

PrimeClean uses ozone, as we have mentioned. Many of you believe that ozone is found around the planet Earth only. However, it can be found in nature as well. Once you connect the hose to a PrimeClean device, it will push ozone through the hose, reach the mask and sanitize both of them. This process is safe and fast.

Ozone kills 99% of all bacteria, viruses and germs. As a matter of fact, many studies have proven that ozone can kill COVID19 virus as well. Once done, your CPAP components will be perfectly clean and safe to use once again.

We must add that you should pre-clean the mask with water and damp towel. This is done to remove sweat, skin debris and oils. If you choose not to do that, your mask may fail to seal properly and you will end up with non-effective CPAP treatment. There is no need to use vinegar or soap, but you can if you want. Avoid using strong soaps or other chemicals. They can cause skin irritation and other complications. It is worth noting that all new components you add to your CPAP machine must be cleaned and sanitized. This is a precaution, but an important one.

How Frequently You Should Use PrimeClean?

In general, you should use PrimeClean 2 times per week. However, during the pandemic you may want to use it every single day. It cannot damage the equipollent but it will kill all the threats inside. As such, using it on a daily basis completely eliminates the risk of skin infections, irritations and more. Yes, you can use it 2 times per day, but there is no actual need for that.

Ideally you will use PrimeClean in the morning, when you wake up. Once done, you will leave the equipment on your bed and you can use it at night without having to wait for the ozone to be converted into oxygen. This also means that there is no risk of any kind involved with use of ozone.

PrimeClean Maintenance

The best part about PrimeClean is lack of maintenance. There is no any maintenance needed. All you have to do is to charge the battery and use it. You may want to clean the device and the bag occasionally. This is needed just to make sure there are no debris, oils or anything similar inside and on these two.

While some other products of the same kind need maintenance which includes replacing the filter, cartridge and some other components, PrimeClean doesn’t require any of that. You will purchase it once and you can use it as long as needed.

Conclusion

The main thing to remember is that using a CPAP Sterilization Machine is mandatory. PrimeClean is the best option these days. It is highly effective, requires no maintenance and it is easy to use. It is even very affordable considering other products. On the other hand, you can expect perfect CPAP therapy, great success and better sleep.

Cleaning CPAP Equipment During COVID19 Outbreak

Using a CPAP Cleaner is mandatory and one of the most important steps you need to take for a proper treatment. In 2020, during the COVID19 pandemic, it is even more important to keep your equipment clean and sanitized all the time. Below we will discuss how and why this is mandatory.

Why It Is Mandatory To Clean CPAP Equipment Regularly?

Cleaning CPAP equipment is mandatory due to several reasons. First of all, when you exhale, that air contains moisture. That moisture is perfect environment for bacteria, germs and viruses. If you do not clean it, they will grow and cause irritations, health complications and so much more. Eventually you can get sick because you have been using ‘’dirty’’ CPAP machine.

The biggest issue here is that COVID19 virus can be found in CPAP machine. Even if you are sick and cured, that virus will infect you again and again. Sanitizing the machine eliminates this. All of this refers to mask, hose, tubing, humidifier and headgear. They need to be cleaned because you will remove dead skin and prevent possible skin irritations.

How To Clean CPAP Gear Perfectly?

There are two methods you can use and both of them are equally important. The first one is to use a proper cleaning device. We recommend PrimeClean. This is the most powerful cleaner on the market. It uses ozone to kill 99% of bacteria and viruses. It even kills COVID19 virus, so you can get a better idea how powerful it is.

On the other side, PrimeClean is safe to use and it doesn’t have side effects on the gear, users or the treatment. The process is simple and it takes less than 30 minutes. Just make sure that the ozone returns to oxygen state after you are done and the process will be successful.

Another way you can use to make sure your CPAP gear is sanitized is to replace them. We do not refer to CPAP machine or large components. We are talking about mask, hose, headgear and filters. Filters need to be replaced once every 4 weeks. This is a machine’s filter. Mask should be replaced every 3 months while tubing can be replaced every 12 months.

All of these are recommended time frames for replacement in normal situations. During the pandemic you may want to replace them sooner.We must add that making sure you replace the old gear with the new one isn’t always straightforward. If you have been using CPAP treatment for a long period of time, you know that you need a mask that suits your face without a single leak. It is an advantage if you can try out the mask before you order it. A safe choice is to get the same model as you own at the moment.

How Frequent You Need To Clean CPAP Gear?

The biggest question of them all is how frequently you need to clean the CPAP machine and the gear in general. There are two answers. The first applies to the CPAP machine and the humidifier, if your machine has it. They need to be cleaned on a weekly basis. Once or two times per week is perfectly fine.

On the other side, you need to clean the mask and the hose on a daily basis. This will make sure there are no bacteria and germs inside the equipment and you will be perfectly safe despite the pandemic. The situation is the same if you use PrimeClean. You need to use it daily and you need to use it properly.

Besides replacing the old components and cleaning, you need to make sure your CPAP machine works well without any issues. They don’t have maintenance, but you may want to clean the air intake occasionally.

The Final Word

Using a proper CPAP Cleaner during a pandemic is extremely important. It will keep you healthy and it will help you get the most out of your CPAP treatment. In return, you can have a proper sleep and you can stay safe from the virus and other issues that are common these days. At the moment, this is the best you can do and all you can afford.

Problems and Solutions When it Comes to Connect a New CPAP Mask to Your Old Tubing

Every now and then CPAP users have the same problem. It is more common than you may believe and it happens to experienced users also. The problem is when a user replaces the CPAP mask. It should fit nicely to the old hose and the CPAP machine afterward. The problem is when you cannot make this connection. Obviously, you cannot use the machine, you cannot use CPAP Cleaner Ozone Sterilizer Disinfector Sanitizer and you need to solve the problem as quickly as possible. Luckily there is a simple solution for all of that. It will be revealed in the content below.

Most Common Issue And How to Fix it

The most common issue is actually with the swivel piece or connector that is stuck in the old hose. Once that happens, you won’t be able to attach a new mask to the old hose because it already has a separate swivel connector installed.

The solution is to pull out the swivel connector. Some users had to use pliers to get this job done. You are less-likely to encounter the same problem but be prepared for anything. Once done, simply connect a new mask to the old hose and connect it to the machine. Now you can use the CPAP Cleaner Ozone Sterilizer Disinfector Sanitizer. In addition, replacing the hose every 6 months or less is important in order to prevent this issue from happening again.

AirFit P10 won’t Connect to the Dream Station Machine Hose

This is another, although less common issue. The tube or the cuff of it is 22mm while the tube itself is 15mm. What this means is that it is universal and it can be connected to a new CPAP machine. The problem is in the 1inch cylinder that is stuck in the hose. It comes from the elbow of the CPAP mask.

Pull it out using your fingers if possible and you will connect the components successfully. It may be deep into the tube, so take your time and try to complete the task without damaging hose.

Climtate line won’t fit the Respironics Dreamwear CPAP Mask

This is a rare issue and it happens with some patients. Basically, they cannot connect these two. The solution was to remove a small part of the swivel after which connection will be possible.

However, the real solution is to use an adapter. In most cases, it will be included in the box and you can only install it. But, if it isn’t included, you will need to get one additionally.

We must add that a swivel piece that comes with a new mask is very important, as you were able to see. If you lose it, in some cases you can find a new piece separately. But, some manufacturers don’t offer this benefit. If that happens, you will need to get a new mask or try to look for compatible swivel made by third-party manufacturers.

F10 Mask Connection With the Non-Heating Hose

First of all, this is possible. You will need to connect the short tube with the end of the heated hose. It is a simple connection but if it isn’t possible, the connector is stuck in the elbow assembly from the mask is located in the hose. Remove it and try to connect the units again.

Conclusion

As you were able to see the most common issue is the fact that a mask swivel connector is stuck in the hose. When you remove it, you will be able to attach a new mask without any fuss. After that, you can use the CPAP machine and you can use CPAP Cleaner Ozone Sterilizer Disinfector Sanitizer to make sure your system is 100% clean and effective. Take your time and try to solve a problem without damaging the components.